Monday, January 15, 2018
engine crank normally runs but fails to start
There is no spark during the sparktest, if the oscilloscope fails to show a secondary voltage pattern , there are several couses:-
if you good spark , the ignition primary & secondary circuit probably are ok. The failure to start with a good spark is more likely due to trouble in the fuel system.
the failure to start with a good spark is more likely due to trouble in the fuel system.
Subscribe to:
Post Comments (Atom)
-
Control-Volume Analysis of Mass, Momentum and Energy is an important topic of Fluid mechanics that deals with topics such as control mass, c...
-
The deformation of a beam is usually expressed in terms of its deflection from its original unloaded position. The deflection is measured fr...
-
Introduction Boundary layer phenomenon occurs when a fluid flows over a flat plate causing laminar or turbulent flow. This topic defines var...
No comments:
Post a Comment
Knowing brings controversy